Current electronic microcontroller board solutions simply do not factor in the ten of hours required to print even the simplest robot. Our Micro-footprint 35 x 69 mm (1.38 x 1.73 inches) all-in-one Arduino compatible microcontroller board means moveable 3D objects can finally be designed and printed.
Provides built in servo and motor drivers
Space for on board battery or external Li-ion battery hookup
Integrated Bluetooth module
Hookup pins for analog and digital inputs/outputs
Includes micro-USB hookup for programming and debugging
Provided custom Arduino Library with example code and pre-implemented functions
Access to JTAG on-chip testing from forward sensor connector.
The 3DoT Robotics board integrates everything you need to autonomously or remotely operate your own 3D printed thing.
The 3DoT board integrates all the components needed to create a small autonomous, RC controlled, or telepresent robot.
At the heart of your robot is an Arduino Leonardo based microcontroller unit (MCU), featuring an 8 MIPS (Millions of Instructions Per Second) 2-stage pipelined AVR RISC processor.
Power for your robot is provided by a single CR123A LiPo 650 mAh rechargeable battery with associated power protection, switching, and conditioning circuitry. Plus, an integrated 3.7v Li-ion battery charger with battery level sensor circuit.
All digital logic powered from a 3.3v LDO (Low Dropout) regulator.
If your robot needs more power, bring your own Li-ion battery (SparkFun compatible JST connector included).
USB (Universal Serial Bus) serial communications circuitry allows you to upload your programs and download data.
An HM-11 Bluetooth module allows wireless communication with the ArxRobot Android/iPhone App and Arxterra control panel.
JST Connectors are provided for up to two (2) DC Motors and two (2) Micro or Ultra-Micro Servos.
To control your robot’s motors the 3DoT board includes a TB6612FNG motor driver.
Customize your robot with 8-pin forward sensor and 16-pin 3DoT Shields, also known as daughter boards.
Programs are written in the Arduino IDE (Integrated Development Environment).
Pre-installed Arxterra 3DoT bootloader plus Robot3DoTBoard library – fully customizable for your robot
Together this software suite running on the ATmega 32U4 microcontroller allows you to control a 2-wheel robot out-of-the-box using the FREE ArxRobot Android/iPhone App.
If the robot can hold your phone, then you can remotely control your robot from anywhere with an internet connection from the Arxterra Control Panel.