Arxterra
  • Home
  • 3DoT
  • Getting Started
    • 3Dot & Arxterra Getting Started Guide
      • 3DoT Initial Arduino Setup
      • Getting Started With the ArxRobot App and Control Panel
      • Custom Command Example – Servos
      • IR Shield Assembly Instructions
      • How To Fold the PaperBoT Paper Skin
    • Advanced 3DoT Tutorials
      • Built in Commands and Telemetry
      • Custom Commands and Telemetry
      • Commands and Telemetry Behind the Scenes
      • Viewing Command and Telemetry Packets
      • Tutorial on Fast Pulse Width Modulation
      • 3Dot Troubleshooting & Bootloader Burning
      • Using the 3DoT Current Limiter
  • Control Panel
  • Classes
    • Intro to Arduino Assembly
      • Class Lectures
      • Labs
      • CSULB Shield
      • Programming Problems
      • Review Material
      • Reference Sheets
    • Advanced Arduino Assembly
      • Class Lectures
      • Labs
      • 3Dot PaperBot
      • Programming Problems
      • Review Material
      • Reference Sheets
    • C/C++ Arduino Robots – Class Lectures
      • Class Lectures
      • Labs
      • Robot Kit
      • Review Material
      • Reference Sheets
    • Engineering Method
      • Class Topics
      • Class Lectures
      • Reference Material
      • Division Training/Resource Documents
    • Project Management
    • Electronics Engineering
    • Systems Engineering
    • Mechanical & 3D Design
    • Quality Control Management
  • Class Projects
    • All Projects
    • Project Videos
    • Project Missions
    • Arxterra Forums
    • 3DoT Projects
      • 3DoT Multi-Limb Projects
      • 3DoT Wheeled Projects
      • 3DoT Track Projects
      • Other 3DoT Projects
    • Bioengineering
      • 3D Bio-Printer
      • A-TeChTop
      • Prosethetic Arm
      • Prosethetic Hand
    • NASA JPL
      • CubeSats
      • Fractured Robots
      • Limbi
    • Pathfinder
      • Pathfinder Solar Array
      • Pathfinder Chassis
    • Other Robots
      • ROSCO
      • Hexapod
      • Spiderbot
      • AdBot
      • Rover
      • Comm Bot
      • Camera Stabilization
      • Robot Arm
      • Solar Tracker
    • Other Projects
      • Pick & Place Machine
      • Tesla
      • SegBoard
      • Segway
      • UFO
      • Velociraptor
      • Vapor Soldering
      • Advanced 3D Printer
    • Research Projects
      • Bluetooth Antenna Design
      • Bluetooth Antenna Design Part II
      • Buck/Boost Converter Model with Motor Load
      • Data Backup with EEEPROM
      • LIDAR
      • Power Management Integrated Circuits
      • PID Controllers
      • One Wire Serial Communication
      • Ultrasonic Sensors & Applications
      • Virtual Reality vs Augmented Reality & Virtual Maze Implementation
      • UART – Universal Asynchronous Receiver-Transmitter
      • Wireless Transceiver nRF24L01+
  • About us
    • Contact
    • Privacy Policy
    • User Data Policy
  • My Account
    • Register
    • Login
    • Logout
  • Click to open the search input field Click to open the search input field Search
  • Menu Menu

Archive for category: Goliath Generation #2

You are here: Home1 / Communites2 / Members and Communities3 / 3DoT Robots4 / 3DoT Goliath5 / Goliath Generation #2

Arxterra Control Panel

November 30, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/11/Arxterra-Control-Panel.jpg 384 385 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-11-30 20:17:062018-03-08 21:32:49Arxterra Control Panel

Rapid Prototyping of Ultrasonic and Sharp IR Sensors

November 13, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/11/Rapird-Prototype.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-11-13 23:45:532018-03-08 21:33:02Rapid Prototyping of Ultrasonic and Sharp IR Sensors

Updated System Design

November 9, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/11/UpdatedSystem.jpg 145 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-11-09 03:03:202018-06-12 18:56:37Updated System Design

MaxSonar Sensor Field of View Experiment

November 9, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/11/MaxSonar.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-11-09 02:39:372018-03-08 21:33:23MaxSonar Sensor Field of View Experiment

Motor Trade Off Study

October 27, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/10/Screen-Shot-2016-10-27-at-3.23.02-PM.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-10-27 22:49:532018-03-08 21:33:31Motor Trade Off Study

Experiment to Determine Torque to Weight Ratio

October 27, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/10/Screen-Shot-2016-10-27-at-3.07.41-PM-copy.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-10-27 22:20:352018-03-08 21:33:36Experiment to Determine Torque to Weight Ratio

Tracking Sensors Trade Off Study

October 27, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/10/Sensor-Trade-Off-Study.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-10-27 21:53:162018-06-12 23:55:23Tracking Sensors Trade Off Study

Simulation and Experiment of 3D Printing

October 20, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/10/Simulation-and-Experiments.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-10-20 21:15:242018-03-08 21:33:49Simulation and Experiment of 3D Printing

Initial Design

October 20, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/10/Initial-Design.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-10-20 20:51:212018-03-08 21:33:54Initial Design

Preliminary Project Plan

September 29, 2016/in 3DoT Goliath, Goliath Generation #2/by Kris Oduca
Read more
https://www.arxterra.com/wp-content/uploads/2016/09/Plan.jpg 144 144 Kris Oduca /wp-content/uploads/2013/04/Arxterra-Logo-340x156.png Kris Oduca2016-09-29 22:34:262018-03-08 21:34:04Preliminary Project Plan
Page 3 of 41234

Login or Register to post

  • Login
  • Register

Recent Posts

  • Solar Tracker December 20, 2021
  • Robotic Arm V.1 December 20, 2021
  • Camera Stabilization Fall 2021 Final Blog Post. December 20, 2021
  • MicroSpot Gen 2 December 20, 2021
  • MicroSpot December 20, 2021
  • Fall 2021 Com Bot Generation 1 Final Blog Post November 29, 2021
  • Top Shield PCB Debugging May 20, 2021
  • Inductive Sensor Issues and Fix – Ugly Blues May 19, 2021
  • Boost System Design – De Robot May 19, 2021
  • LDC Sensor Selection Research May 19, 2021

Like Us!

© Copyright - Arxterra - Enfold Theme by Kriesi
  • Link to X
  • Link to Facebook
  • Home
  • 3DoT
  • Getting Started
  • Control Panel
  • Classes
  • Class Projects
  • About us
  • My Account
Scroll to top Scroll to top Scroll to top