Entries by Muhannad Al Mohamed

Eagle CAD Training

Written By: Muhannad Al Mohamed (E&C DM) Objective This blog is intended to introduce Eagle CAD designing application to members to be able to design schematics for electronic circuits. The members of the E&C division are required to know how to make schematics of customed printed circuit boards (PCB) for their corresponding projects. These schematics can be […]

Color Sensor Shield: Fabrication, Integration, and Test

Approved By: Muhannad Al Mohamed, Charles Banuelos, Melwin Pakpahan Written By: Muhannad Al Mohamed Color Sensor Shield Parts and Design The parts used in the fabrication of each color sensor shields are the printed circuit board, electronic parts(two color sensors (BH1745NUC-E2), two LEDs (0603 package), two 150 Ohms resistors (0603 package), one 10k resistor (0603 […]

Electronic Components BOM and Order: Goliath

Written By: Muhannad Al Mohamed (Electronics & Control Division Manager) Components Goliath’s project uses electronic components listed in the figure below. However, an update should be made to this list in regards to the color sensing components. Since we will be using BH1745NUC IC in sensing color, the Adafruit TCS340725 should be changed along with the components […]

Electronic Component BOM and Order: ModWheels

Written By: Muhannad Al Mohamed (E&C DM) Components The ModWheels project uses electronic components listed in the figure below. For now, the project is set on not making a custom PCB. However, if the members of the project decided to make a custom PCB, this list should be updated. Also, this list does not include […]

Electronic Component BOM and Order: PeteBot

Written By: Muhannad Al Mohamed (E&C DM) Components The PeteBot(3DoT Chassis) uses electronic components listed in the figure below. These parts include the electronic parts that would be used in making the project’s costume PCB as well. This list needs to be updated to include the new color sensor with its related components. As seen […]

Electronic Component BOM and Order: Sojourner

Written by: Muhannad Al Mohamed (E&C DM) Components Sojourner uses electronic components listed in the figure below. However, an update should be made to this list in regards to the color sensing components. Since we will be using BH1745NUC IC in sensing color, the Adafruit TCS340725 should be changed along with the components of the generic color sensor. […]